Salter-brecknell ESA Series User Manual download pdf (Page 6)

5.0 Scale Operation

This section covers the scale operations of weighing and counting.

Note: Always make sure that the balance is on a clean, dry, level and solid

surface.

Simple Weighing

1. Turn the balance on. The balance will go through a series of tests and

then display all zeroes (0’s).

2. Press the Units key until the desired unit of measure is displayed on the

far right of the display.

3. Press the Tare key if the display no longer reads zero.

4. Place item(s) to be weighed on the weighing platform. The weight will

be displayed with the appropriate unit of measure next to it.

5. Remove the item(s) from the balance and repeat steps 2 - 5 to continue

weighing.

Tare Weighing

If you want to do net weighing, such as weighing objects in a container, follow

these steps.

1. Turn the balance on. The balance will go through a series of tests and

then display all zeroes (0’s).

2. Press the Units key until the desired unit of measure is displayed on the

far right of the display.

3. Place the container to be tared on the weighing platform and press the

Tare key. The display should return to zero.

4. Place item(s) to be weighed in the container. The weight will be

displayed with the appropriate unit of measure next to it. The weight

displayed is the net weight and does not include the weight of the

container.

5. Remove the item(s) from the container and repeat steps 3 - 5 to

continue weighing with the same container.

Note: If you

remove the container, the balance will show a negative weight.

Press the Tare key to return the balance to zero.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Salter-brecknell ESA Series User Manual Page 6