1Model CS Crane ScaleUser Instructions1.0 General InformationThank you for purchasing the Model CS crane scale. Please read all operating instructions
106.0 Display messagesThere are several messages which may appear on the scale display. Below is a list of those messages and what they mean.Err10 You
117.0 SpecificationsCapacity 1000lb x 0.5lb / 500kg x 0.2kgor2000lb X 1 lb/1000kg x 0.5kgDisplay Five digits, 1.2” / 3cm character height LEDZero rang
UK and EUROPEBrecknellFoundry Lane, SmethwickWest MidlandsB66 2LPTel: +44 (0) 845 246 6717Fax: +44 (0) 845 246 6718Email: [email protected]
2Figure 1.1 shows the front panel of the scale.Figure 1.1 Model CS front panelFigure 1.2 shows the remote control keypad.Figure 1.2 Remote control key
3TARE Press to tare the weight of a container from the scale. The tare light will illuminate and the display will show net weight. Warning: Be sure to
4The unit will beep and the display will do a startup test, show the capacity, the battery voltage and then display 0.0 weight.2. Apply the load to th
5Entering a Known Tare Weight With the Remote ControlYou can key in a tare weight before placing an item on the scale by using the remote control. Fol
6Performing, Viewing and Clearing Weight AccumulationYou can accumulate displayed weight to a memory channel. The minimum weight that can be accumluat
7Clearing the Accumulator1. To clear accumulated weight from the scale, press the RC CLEAR key…CLr is displayed.2a). To exit without clearing the accu
82. Press the RC F1 key…U X.XX is displayed. This stands for the voltage.3. Press the RC MR key again to cancel the display and return to normal weigh
95.0 TroubleshootingTable 1: Troubleshooting GuideSymptom Reason SolutionNo display when turned on Battery dead or loose contactCheck the batteryTight
Comments to this Manuals