ESA_AWT35-500064_AE.bookESA SERIESELECTRONIC BALANCE
10Change Print SettingsYou can select either Continuous Print or Print When Stable.1. Remove all weight (except platter) and power the balance off.2.
111. Remove the two screws holding the battery compartment lid on the bottom of the scale.2. Gently pry up the battery cover and remove.3. Insert the
12Table 2: Error Codes and TroubleshootingProblem Cause(s) Solution(s)Err 0 This typically indicates that the platform is too light. Ensure that the s
138.0 SpecificationsTable 3: SpecificationsMODELESA-150ESA-300ESA-600 ESA-1200 ESA-3000 ESA-6000Capacity & Resolution150 x 0.005 g300 x 0.005 g600
PN AWT35-500064 AE February 2010 UK and EUROPE USASalter Brecknell WeighingP.O. Box 9533Smethwick West Midlands B66 2 TETel: +44 (0) 870 444 6132Fax:
Declarations of compliance United StatesThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to P
A copy of the original signed Declaration of Conformity is available on request.Declaration of ConformityManufacturer Salter BrecknellType ESACorrespo
4ESA Series Precision BalanceThank you for purchasing the Model ESA precision balance. Please read all operating instructions carefully before using a
5• Gently place the weighing platform on the mounting posts on the top of the base of the balance. The base’s posts should fit easily into the holes o
65.0 Scale OperationThis section covers the scale operations of weighing and counting.Note: Always make sure that the balance is on a clean, dry, leve
7General Counting FunctionThe ESA series will count parts based on the weight of a reference sample of 5, 10, 20, 30, 40 or 50 pieces. For best result
8Sensitivity Calibration 1. With the scale in regular weighing mode, press the Tare key to zero the balance. 2. Press the Cal key.The balance will sho
97.0 Communications & PrintingThe ESA balances can be connected to a PC or appropriate printer using a null modem cable (not supplied). The balanc
Comments to this Manuals