Salter-brecknell 200ES User Manual download pdf (Page 27)

5-4

5.2 USER MENU PROCEDURES

This section provides instructions for all of the User Menu procedures.

5.2.1 ID Number Entry (A8)

1. While in the User Menu mode, scroll to "A 8", then scroll down once using the

ZERO key to enter the ID Number menu.

2. The display will momentarily show "ID NO", followed by a value with one flashing

digit. This value will be the current ID number value.

3. Use the four directional keys (shown in Figure 5-1 below) to adjust the displayed

value to the actual ID Number value. Increase the flashing digit by pressing the

UNITS key. Decrease the flashing digit by pressing the ZERO key. Pressing the

PRINT key or the TARE key will change the position of the flashing digit.

USER MODE KEY FUNCTIONS

ZERO

GROSS

NET

TARE PRINT

SET

UNITS

Figure 5-1: User Menu Key Assignments

4. After setting the exact value, press the NET/GROSS key to save the ID Number

value. The display will show "SET" momentarily, then revert back up to A8.

5.2.2 LF (Line Feeds) Number Entry (A9)

1. While in the User Menu mode, scroll to "A 9", then scroll down once using the

ZERO key to enter the Line Feeds menu.

2. The display will momentarily show "LF", followed by the current line feeds value.

3. Use the four directional keys (shown in Figure 5-1 above) to adjust the displayed

value to the actual line feeds value. Increase the flashing digit by pressing the

UNITS key. Decrease the flashing digit by pressing the ZERO key. Pressing the

PRINT key or the TARE key will change the position of the flashing digit.

4. After setting the exact value, press the NET/GROSS key to save the line feeds

value. The display will show "SET" momentarily, then revert back up to A9.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 46 47

No comments

Salter-brecknell 200ES User Manual Page 27